MCHT Courses at West Georgia Technical College
Summer 2026 · 42 sections across 9 courses
42 In-Person6 Evening
42 sections
| CRN | Course | Title | Schedule | Starts | Instructor | Campus | Mode | |
|---|---|---|---|---|---|---|---|---|
| 66691 | MCHT 1011 | Introduction to Machine Tool | M Tu W Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66692 | MCHT 1011 | Introduction to Machine Tool | M Tu W 4:00 PM–9:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66447 | MCHT 1011 | Introduction to Machine Tool | M 4:00 PM–5:30 PM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66448 | MCHT 1011 | Introduction to Machine Tool | M 8:00 AM–9:30 AM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66450 | MCHT 1011 | Introduction to Machine Tool | M 8:00 AM–9:30 AM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66451 | MCHT 1011 | Introduction to Machine Tool | M 4:00 PM–5:30 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66454 | MCHT 1012 | Print Reading for Machine Tool | M 5:35 PM–6:35 PM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66437 | MCHT 1012 | Print Reading for Machine Tool | M 9:35 AM–10:35 AM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66482 | MCHT 1012 | Print Reading for Machine Tool | M 5:35 PM–6:35 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66444 | MCHT 1012 | Print Reading for Machine Tool | M 9:35 AM–10:35 AM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66455 | MCHT 1012 | Print Reading for Machine Tool | M Tu W 4:00 PM–9:00 PM | Starts May 26 | White, Timothy | Coweta CEC | In-Person | |
| 66435 | MCHT 1012 | Print Reading for Machine Tool | M Tu W Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66436 | MCHT 1013 | Machine Tool Math Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0) | M 10:40 AM–11:40 AM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66483 | MCHT 1013 | Machine Tool Math Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0) | M 6:40 PM–7:40 PM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66485 | MCHT 1013 | Machine Tool Math Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0) | M 6:40 PM–7:40 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66441 | MCHT 1013 | Machine Tool Math Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0) | M 10:40 AM–11:40 AM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66486 | MCHT 1013 | Machine Tool Math Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0) | M Tu W Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66484 | MCHT 1013 | Machine Tool Math Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0) | M Tu W 4:00 PM–9:00 PM | Starts May 26 | White, Timothy | Coweta CEC | In-Person | |
| 66587 | MCHT 1020 | Heat Treatment & Surf.Grinding | Tu Th 8:00 AM–12:00 PM | Starts May 26 | Gerber, Nelson | Carroll | In-Person | |
| 66588 | MCHT 1020 | Heat Treatment & Surf.Grinding | Tu Th 6:40 PM–7:40 PM | Starts May 26 | Gerber, Nelson | Carroll | In-Person | |
| 66589 | MCHT 1020 | Heat Treatment & Surf.Grinding | W 6:40 PM–9:00 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66590 | MCHT 1020 | Heat Treatment & Surf.Grinding | M 8:00 AM–12:00 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66591 | MCHT 1020 | Heat Treatment & Surf.Grinding | M 4:00 PM–9:00 PM | Starts May 26 | White, Timothy | Coweta CEC | In-Person | |
| 66592 | MCHT 1020 | Heat Treatment & Surf.Grinding | Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66438 | MCHT 1030 | Applied Measurement | M 4:00 PM–5:30 PM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66440 | MCHT 1030 | Applied Measurement | M 11:45 AM–1:00 PM | Starts May 26 | White, Timothy | Carroll | In-Person | |
| 66442 | MCHT 1030 | Applied Measurement | M 11:45 AM–1:00 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66480 | MCHT 1030 | Applied Measurement | M 4:00 PM–5:30 PM | Starts May 26 | Wilson, Tommy | LaGrange | In-Person | |
| 66439 | MCHT 1030 | Applied Measurement | M Tu W Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66481 | MCHT 1030 | Applied Measurement | M Tu W 4:00 PM–9:00 PM | Starts May 26 | White, Timothy | Coweta CEC | In-Person | |
| 66487 | MCHT 1119 | Lathe Operations I | M Tu 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66488 | MCHT 1119 | Lathe Operations I | M Tu 4:00 PM–9:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66594 | MCHT 1120 | Mill Operations I | M Tu 4:00 PM–9:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66595 | MCHT 1120 | Mill Operations I | W Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66445 | MCHT 1219 | Lathe Operations II Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0) | Tu Th 8:00 AM–1:00 PM | Starts May 26 | Gerber, Nelson | Carroll | In-Person | |
| 66489 | MCHT 1219 | Lathe Operations II Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0) | Tu Th 4:00 PM–9:00 PM | Starts May 26 | Gerber, Nelson | Carroll | In-Person | |
| 66490 | MCHT 1219 | Lathe Operations II Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0) | W Th 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person | |
| 66462 | MCHT 1219 | Lathe Operations II Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0) | W 4:00 PM–9:00 PM | Starts May 26 | White, Timothy | Coweta CEC | In-Person | |
| 66491 | MCHT 1220 | Mill Operations II Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0) | Tu Th 4:00 PM–9:00 PM | Starts May 26 | Gerber, Nelson | Carroll | In-Person | |
| 66461 | MCHT 1220 | Mill Operations II Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0) | Tu Th 8:00 AM–1:00 PM | Starts May 26 | Gerber, Nelson | Carroll | In-Person | |
| 66446 | MCHT 1220 | Mill Operations II Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0) | W 4:00 PM–9:00 PM | Starts May 26 | White, Timothy | Coweta CEC | In-Person | |
| 66443 | MCHT 1220 | Mill Operations II Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0) | M Tu 8:00 AM–1:00 PM | Starts May 26 | Whitman, Richard | Coweta CEC | In-Person |
MCHT 1011
Introduction to Machine Tool
CRN: 66691Campus: Coweta CECSchedule: M Tu W Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1011
Introduction to Machine Tool
CRN: 66692Campus: Coweta CECSchedule: M Tu W 4:00 PM–9:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1011
Introduction to Machine Tool
CRN: 66447Campus: CarrollSchedule: M 4:00 PM–5:30 PMStarts May 26Instructor: White, Timothy
MCHT 1011
Introduction to Machine Tool
CRN: 66448Campus: CarrollSchedule: M 8:00 AM–9:30 AMStarts May 26Instructor: White, Timothy
MCHT 1011
Introduction to Machine Tool
CRN: 66450Campus: LaGrangeSchedule: M 8:00 AM–9:30 AMStarts May 26Instructor: Wilson, Tommy
MCHT 1011
Introduction to Machine Tool
CRN: 66451Campus: LaGrangeSchedule: M 4:00 PM–5:30 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1012
Print Reading for Machine Tool
CRN: 66454Campus: CarrollSchedule: M 5:35 PM–6:35 PMStarts May 26Instructor: White, Timothy
MCHT 1012
Print Reading for Machine Tool
CRN: 66437Campus: CarrollSchedule: M 9:35 AM–10:35 AMStarts May 26Instructor: White, Timothy
MCHT 1012
Print Reading for Machine Tool
CRN: 66482Campus: LaGrangeSchedule: M 5:35 PM–6:35 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1012
Print Reading for Machine Tool
CRN: 66444Campus: LaGrangeSchedule: M 9:35 AM–10:35 AMStarts May 26Instructor: Wilson, Tommy
MCHT 1012
Print Reading for Machine Tool
CRN: 66455Campus: Coweta CECSchedule: M Tu W 4:00 PM–9:00 PMStarts May 26Instructor: White, Timothy
MCHT 1012
Print Reading for Machine Tool
CRN: 66435Campus: Coweta CECSchedule: M Tu W Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1013
Machine Tool Math
Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0)
CRN: 66436Campus: CarrollSchedule: M 10:40 AM–11:40 AMStarts May 26Instructor: White, Timothy
MCHT 1013
Machine Tool Math
Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0)
CRN: 66483Campus: CarrollSchedule: M 6:40 PM–7:40 PMStarts May 26Instructor: White, Timothy
MCHT 1013
Machine Tool Math
Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0)
CRN: 66485Campus: LaGrangeSchedule: M 6:40 PM–7:40 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1013
Machine Tool Math
Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0)
CRN: 66441Campus: LaGrangeSchedule: M 10:40 AM–11:40 AMStarts May 26Instructor: Wilson, Tommy
MCHT 1013
Machine Tool Math
Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0)
CRN: 66486Campus: Coweta CECSchedule: M Tu W Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1013
Machine Tool Math
Requires: MATH 1012 (min C 0) or MATH 1012G (min C 0) or Mathematics (MAT) 1012 (min C 0) or Mathematics (MAT) 1012G (min C 0)
CRN: 66484Campus: Coweta CECSchedule: M Tu W 4:00 PM–9:00 PMStarts May 26Instructor: White, Timothy
MCHT 1020
Heat Treatment & Surf.Grinding
CRN: 66587Campus: CarrollSchedule: Tu Th 8:00 AM–12:00 PMStarts May 26Instructor: Gerber, Nelson
MCHT 1020
Heat Treatment & Surf.Grinding
CRN: 66588Campus: CarrollSchedule: Tu Th 6:40 PM–7:40 PMStarts May 26Instructor: Gerber, Nelson
MCHT 1020
Heat Treatment & Surf.Grinding
CRN: 66589Campus: LaGrangeSchedule: W 6:40 PM–9:00 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1020
Heat Treatment & Surf.Grinding
CRN: 66590Campus: LaGrangeSchedule: M 8:00 AM–12:00 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1020
Heat Treatment & Surf.Grinding
CRN: 66591Campus: Coweta CECSchedule: M 4:00 PM–9:00 PMStarts May 26Instructor: White, Timothy
MCHT 1020
Heat Treatment & Surf.Grinding
CRN: 66592Campus: Coweta CECSchedule: Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1030
Applied Measurement
CRN: 66438Campus: CarrollSchedule: M 4:00 PM–5:30 PMStarts May 26Instructor: White, Timothy
MCHT 1030
Applied Measurement
CRN: 66440Campus: CarrollSchedule: M 11:45 AM–1:00 PMStarts May 26Instructor: White, Timothy
MCHT 1030
Applied Measurement
CRN: 66442Campus: LaGrangeSchedule: M 11:45 AM–1:00 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1030
Applied Measurement
CRN: 66480Campus: LaGrangeSchedule: M 4:00 PM–5:30 PMStarts May 26Instructor: Wilson, Tommy
MCHT 1030
Applied Measurement
CRN: 66439Campus: Coweta CECSchedule: M Tu W Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1030
Applied Measurement
CRN: 66481Campus: Coweta CECSchedule: M Tu W 4:00 PM–9:00 PMStarts May 26Instructor: White, Timothy
MCHT 1119
Lathe Operations I
CRN: 66487Campus: Coweta CECSchedule: M Tu 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1119
Lathe Operations I
CRN: 66488Campus: Coweta CECSchedule: M Tu 4:00 PM–9:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1120
Mill Operations I
CRN: 66594Campus: Coweta CECSchedule: M Tu 4:00 PM–9:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1120
Mill Operations I
CRN: 66595Campus: Coweta CECSchedule: W Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1219
Lathe Operations II
Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0)
CRN: 66445Campus: CarrollSchedule: Tu Th 8:00 AM–1:00 PMStarts May 26Instructor: Gerber, Nelson
MCHT 1219
Lathe Operations II
Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0)
CRN: 66489Campus: CarrollSchedule: Tu Th 4:00 PM–9:00 PMStarts May 26Instructor: Gerber, Nelson
MCHT 1219
Lathe Operations II
Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0)
CRN: 66490Campus: Coweta CECSchedule: W Th 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
MCHT 1219
Lathe Operations II
Requires: MCHT 1119 (min C 0) or Machine Tool Technology (MCH) 109 (min C 0) or Machine Tool Technology (MCH) 109G (min C 0)
CRN: 66462Campus: Coweta CECSchedule: W 4:00 PM–9:00 PMStarts May 26Instructor: White, Timothy
MCHT 1220
Mill Operations II
Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0)
CRN: 66491Campus: CarrollSchedule: Tu Th 4:00 PM–9:00 PMStarts May 26Instructor: Gerber, Nelson
MCHT 1220
Mill Operations II
Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0)
CRN: 66461Campus: CarrollSchedule: Tu Th 8:00 AM–1:00 PMStarts May 26Instructor: Gerber, Nelson
MCHT 1220
Mill Operations II
Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0)
CRN: 66446Campus: Coweta CECSchedule: W 4:00 PM–9:00 PMStarts May 26Instructor: White, Timothy
MCHT 1220
Mill Operations II
Requires: MCHT 1120 (min C 0) or Machine Tool Technology (MCH) 115 (min C 0) or Machine Tool Technology (MCH) 115G (min C 0)
CRN: 66443Campus: Coweta CECSchedule: M Tu 8:00 AM–1:00 PMStarts May 26Instructor: Whitman, Richard
Browse Other Subjects at West Georgia Technical College
Accounting (ACCT)AIRC (AIRC)ALHS (ALHS)AMCA (AMCA)ARTS (ARTS)AUMF (AUMF)AUTT (AUTT)Biology (BIOL)BUSN (BUSN)CCMN (CCMN)Chemistry (CHEM)CISM (CISM)CIST (CIST)COMP (COMP)COSM (COSM)CRJU (CRJU)CTDL (CTDL)CUUL (CUUL)DENA (DENA)DHYG (DHYG)DIET (DIET)ECCE (ECCE)Economics (ECON)ELTR (ELTR)EMPL (EMPL)EMSP (EMSP)English (ENGL)ESTH (ESTH)FOSC (FOSC)FRSC (FRSC)FSRV (FSRV)HIMT (HIMT)History (HIST)HRTM (HRTM)HUMN (HUMN)IDSY (IDSY)MAST (MAST)Mathematics (MATH)MEGT (MEGT)MGMT (MGMT)MKTG (MKTG)MLBT (MLBT)MUSC (MUSC)NAST (NAST)PHAR (PHAR)PNSG (PNSG)Political Science (POLS)Psychology (PSYC)RADT (RADT)RELG (RELG)RNSG (RNSG)SOCI (SOCI)SPAN (SPAN)Speech (SPCH)SURG (SURG)THEA (THEA)WELD (WELD)